Other information:
Please prepare bulbs with appropriate
standards in case of emergencies. Refer
to “Bulb Wattage” on page 9-04.
When changing bulbs and sorts, first
turn off the engine at a safe place,
firmly apply the side brake and take
out the battery's negative (-) terminal.
WARNING
Working on t ...
Repair procedures
Inspection
Multifunction Switch Inspection
1. Check for continuity between the terminals in each switch position as shown below.
Rear Wiper & Washer Switch[LHD]
[RHD]
Inspection (With KDS/GDS)
1. In the body electrical system, failure can be quickly diagnosed b ...