For the cigarette lighter to work, the
ignition switch must be in the ACC position
or the ON position.
To use the cigarette lighter, push it all
the way into its socket. When the element
ha ...
Other information:
Components and components location
Components
1. Cowl cross bar assembly 2. Main wiring harness 3. Main crash pad assembly 4. Side air vent duct assembly [RH] 5. Crash pad center lower panel assembly 6. Crash pad center fascia garnish 7. Glove box complete 8. Heater c ...
1. Open the hood.
2. Remove the bulb-socket from the
headlamp assembly by turning the
bulb-socket counterclockwise until
the tabs on the bulb-socket align
with the slots on the headlamp assembly.
3. Remove the bulb from the bulbsocket
by pressing it in and rotating
it counterclockwis ...