Kia Picanto: Features of your vehicle / Wipers and washers

A : Wiper speed control (front)
1. 2/HI – High wiper speed
2. 1/LO – Low wiper speed
3. ---/INT – Intermittent wipe
4. O/OFF – Off
5. /1X – Single wipe
B : Intermittent control wipe time adjustment
C : Wash with brief wipes (front) *
D : Rear wiper/washer control *
6. 1/ON – Intermittent wipe
7. O/OFF – Off
E : Wash with brief wipes (rear)
To adjust the headlight beam level according
to the number of the passengers
and loading weight in the luggage
area, turn the beam leveling switch.
The higher the number of the switch
posit ...
Operates as follows when the ignition
switch is turned ON.
1 2/HI : Fast wiper speed
2 1/LO : Normal wiper speed
3 ---/INT :
Wiper operates intermittently
at the same wiping
intervals. Us ...
Other information:
Components and components location
Components
[RH]
1. BJ assembly 2. Clip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 11. Circlip 12. TJ housing 13. Circlip
[LH]
1. BJ assembly 2. BJ circlip 3. ...
Seat belt systems should never be disassembled
or modified. In addition, care
should be taken to assure that seat
belts and belt hardware are not damaged
by seat hinges, doors or other
abuse.
WARNING
When you return the rear seatback
to its upright position after
the rear seatba ...