Kia Picanto: What to do in an emergency / If you have a flat tire (with tire mobility kit) (Type A)
Please read the instructions before using
the Tire Mobility Kit.
1. Compressor
2. Sealant bottle
The Tire Mobility Kit is a temporary fix
to the tire and have the tire inspected
by a professional workshop as soon as
possible. Kia recommends to visit an
authorized Kia dealer/service partner.
CAUTION
One sealant for one tire
When two or more tires are flat, do
not use the Tire Mobility Kit because
the one supplied canister of sealant
in the Tire Mobility Kit is to only
enough sealant for one flat tire.
WARNING
Tire wall
Do not use the Tire Mobility Kit to
repair punctures in the tire walls.
This can result in an accident due to
tire failure.
WARNING
Temporary fix
Have your tire repaired as soon as
possible. The tire may lose air pressure
at any time after inflating with
the Tire Mobility Kit.
CAUTION
- When replacing or repairing the
tire after using tire sealant, make
certain to remove the sealant attached
to the inner part of the tire
and wheel. If the sealant is not removed,
noise and vibration may
occur.
- We recommend use original Kia
manufactured sealant.
- If the TPMS warning light illuminates
after using the TMK, have
your vehicle inspected by a professional
workshop. Kia recommends
to contact an authorized Kia dealer/
service partner.
❈ The actual Jack label in the vehicle
may differ from the illustration. For
more detailed specifications, refer
to the label attached to the jack.
1. Model Name
2. Maximum allowable load ...
With the Tire Mobility Kit (TMK) you
stay mobile even after experiencing a
tire puncture.
The system of compressor and sealing
compound effectively and comfortably
seals most punctures in a ...
Other information:
Specifications
Specifications
[BCM Type]
Items
Specifications
Rated voltage DC 12 V Operating voltage DC 9 - 16 V Operating temperature -31 - 167°F (-35 - 75°C) Dark current SMK : 3mA / Keyless : 3.5mA
[Non-BCM Type ( ...
Repair procedures
Removal
1.Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.Drain the coolant.
(Refer to Cooling System - "Coolant")
3.Disconnect the oil cooler coolant hoses (A).
4.Remove the ...