Other information:
Repair procedures
Inspection
Rear Wiper Motor
1.Remove the connector from the rear wiper motor.
2.Connect positive (+) battery cables to terminal 1 and negative (-) battery cables to terminal 2 respectively.
3.Check that the motor operates normally. If they are abnormal, replace the washer ...
The ISG system will operate under
the following condition:
- The driver’s seat belt is fastened.
- The driver’s door and hood are closed.
- The brake vacuum pressure is adequate.
- The battery is sufficiently charged.
- The outside temperature is more
than -2°C (28.4°F).
- The o ...