
1. Driver’s door power window switch
2. Front passenger’s door power window
switch
3. Rear door (left) power window
switch
4. Rear door (right) power window
switch
5. Window opening and closing
6. Automatic power window up * /
down
7. Power window lock switch
NOTICE
In cold and wet climates, power windows may not work properly due to freezing conditions.
Opening the tailgate The tailgate is locked or unlocked when all doors are locked or unlocked with the transmitter (or smart key) or central door lock switch.
The ignition switch must be in the ON position for power windows to operate. Each door has a power window switch that controls the door's window. The driver has a power window lock switch which can block the operation of rear passenger windows.
Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3.Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening a bolt.
Components and components location Component Location 1. Mode Control Actuator Description and operation Description The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit.