| Components |

| 11. Rear bumper cover assembly 2. Rear bumper beam | 3. Rear bumper side mounting bracket [LH] |
Components and components location Component Location 1. Quarter fixed glass Repair procedures Replacement Put on gloves to protect your hands.
Components and components location Component Location 1. Rear bumper cover Repair procedures Replacement Put on gloves to protect your hands.
Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3.Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening a bolt.
Repair procedures Inspection 1.Check for continuity between the terminals. If there is an abnormality, replace the switch. Removal • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.