Kia Picanto (JA): Front Seat Belt / Height Adjuster

Kia Picanto (JA) 2017-2026 Service & Repair Manual / Body (Interior and Exterior) / Front Seat Belt / Height Adjuster

Components and components location

Component Location

1. Height Adjuster


Repair procedures

Replacement
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Retractor")
2.
After loosening the mounting bolts, remove the height adjuster (A).
Tightening torque :
39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

3.
Install in the reverse order of removal.
   
Replace any damaged clips.

    Components and components location Component Location 1. Front seat belt retractor Repair procedures Replacement 1.Remove the center pillar upper trim.

    Components and components location Component Location 1. Front seat belt buckle Repair procedures Replacement 1.Remove the front seat assembly.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Smart Key

    Repair procedures Smart Key Smart Key Code Saving 1. Connect the DLC cable of KDS/GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on KDS/GDS. 2. Select the vehicle model and then do "Smart key code saving".

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Blower Motor

    Repair procedures Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor voltage is not operated well, substitute with a known-good blower motor and check for proper operation. 3. If the problem is corrected, replace the blower motor.

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0187