Kia Picanto (JA): Front Seat Belt / Front Seat Belt Buckle

Kia Picanto (JA) 2017-2025 Service & Repair Manual / Body (Interior and Exterior) / Front Seat Belt / Front Seat Belt Buckle

Components and components location

Component Location

1. Front seat belt buckle

Repair procedures

Replacement

1.	Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")

2.	Disconnect the front seat belt wiring mounting clips (A).

Remove the front seat belt buckle (A) after loosening the mounting bolt.

Tightening torque :

39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

Install in the reverse order of removal.

•	Make sure that the connector is plugged in properly.

•	Replace any damaged clips.

❮Height Adjuster

Components and components location Component Location 1. Height Adjuster Repair procedures Replacement 1.Remove the front seat belt upper anchor.

Hood❯

Repair procedures Adjustment 1. After loosening the hinge (A) mounting bolts, adjust the hood (B) by moving it up and down, or right and left. 2.

Other information:

Kia Picanto (JA) 2017-2025 Service & Repair Manual: Rear Washer Switch

Repair procedures Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position as shown below. Rear Wiper & Washer Switch[LHD] [RHD] Inspection (With KDS/GDS) 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS).

Kia Picanto (JA) 2017-2025 Service & Repair Manual: Evaporator Core