Kia Picanto JA: Body (Interior and Exterior) / Front Seat Belt

Kia Picanto (JA) 2017-{YEAR} Service & Repair Manual / Body (Interior and Exterior) / Front Seat Belt

Components and components location
Components

1. Front seat belt retractor
2. Height adjuster
3. Rear seat belt retractor
4. Rear seat belt buckle

Front Seat Frame Assembly

Components and components location Component Location 1. Front seat back frame assembly 2. Front seat cushion frame assembly Repair procedures Replacement    • Put on gloves to protect your hands...

Front Seat Belt Retractor

Components and components location Component Location 1. Front seat belt retractor Repair procedures Replacement 1.Remove the center pillar upper trim...

Other information:

Kia Picanto (JA) 2017-2025 Service & Repair Manual: Hood Latch


Components and components location Component Location 1. Hood lower latch assembly Repair procedures Replacement 1. Disconnect the hood latch connector (A). 2. Remove the hood lower latch assembly (A) after loosening the bolts...

Kia Picanto (JA) 2017-2025 Service & Repair Manual: Immobilizer System


Schematic diagrams Circuit Diaram Description and operation Description The immobilizer system will disable the vehicle unless the proper ignition key is used, in addition to the currently available anti-theft systems such as car alarms, the immobilizer system aims to drastically reduce the rate of auto theft...

Categories

Windshield defrosting and defogging

WARNING

Windshield heating

Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob or button to the position and fan speed control knob or button to the lower speed.

For maximum defrosting, set the temperature control to the extreme right/hot position and the fan speed control to the highest speed. If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position. Before driving, clear all snow and ice from the windshield, rear window, outside rear view mirrors, and all side windows. Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield.

read more

 
Copyright © 2025 www.kpicanto.com - 0.0694