| Components |

| 1. Water jacket insert 2. Water jacket insert inlet 3. Cylinder block 4. O-ring 5. Oil jet 6. Thrust bearing 7. Crankshaft upper main bearing | 8. Crankshaft 9. Crankshaft lower main bearing 10. Crankshaft main bearing cap 11. Ladder frame 12. Rear oil seal 13. Flywheel |

| 1. Piston ring (#1) 2. Piston ring (#2) 3. Oil ring 4. Snap ring 5. Piston | 6. Piston pin 7. Connecting rod 8. Connecting rod upper bearing 9. Connecting rod lower bearing 10.Connecting rod bearing cap |
Repair procedures Removal And Installation Thermostat Disassembly of the thermostat would have an adverse effect, causing a lowering of cooling efficiency.
Repair procedures Removal and Installation 1.Remove the manual transaxle assembly. (Refer to Manual Transaxle System - "Manual Transaxle") 2.
Repair procedures Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) from the mirror holder. Be careful not to damage the fixing clips (A). 3. Disconnect the heating connectors (A) from the mirror.
Repair procedures Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor voltage is not operated well, substitute with a known-good blower motor and check for proper operation. 3. If the problem is corrected, replace the blower motor.