| Components |

| 1. Cowl cross bar assembly 2. Main wiring harness 3. Main crash pad assembly 4. Side air vent duct assembly [RH] 5. Crash pad center lower panel assembly 6. Crash pad center fascia garnish 7. Glove box complete | 8. Heater control assembly 9. Center fascia panel assembly 10. Audio unit assembly 11. Cluster fascia upper panel assembly 12. Instrument cluster assembly 13. Side air vant duct assembly [LH] |
Components and components location Component Location 1. Cowl top cover Repair procedures Replacement Put on gloves to protect your hands.
Components and components location Component Location 1. Cluster fascia panel assembly Repair procedures Replacement Put on gloves to protect your hands.
Repair procedures Inspection Front Washer Motor 1.With the washer motor connected to the reservoir tank, fill the reservoir tank with water. • Before filling the reservoir tank with water, check the filter for foreign material or contamination.
Components and components location Component Location 1. Mode Control Actuator Description and operation Description The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit.