Kia Picanto (JA): Tailgate / Tailgate Latch

Kia Picanto (JA) 2017-2026 Service & Repair Manual / Body (Interior and Exterior) / Tailgate / Tailgate Latch

Components and components location

Component Location

1. Tailgate latch assembly

Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Remove the tailgate trim. (Refer to Tailgate - " Tailgate Trim")

2.	Disconnect the tailgate latch connector (A).

Remove the tailgate latch assembly (B) after loosening the mounting bolts (A).

Tightening torque :

10.8 - 11.8 N·m (1.1 - 1.2 kgf·m, 8.0 - 8.7 lb·ft)

Install in the reverse order of removal.

•	Make sure that the tailgate locks/unlocks and opens/closes properly.

•	Adjust the tailgate alignment.

•	Make sure the connectors are connected in properly.

❮Tailgate Trim

Components and components location Component Location 1. Tailgate trim Repair procedures Replacement Put on gloves to protect your hands.

Tailgate Lift❯

Repair procedures Replacement Be careful as the tailgate may fall down on people when the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open.

Other information:

Kia Picanto (JA) 2017-2026 Service & Repair Manual: Emergency Call (eCall) Button

Components and components location Component Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, separate the map lamp lens (A) from the map lamp. 3. Remove the map lamp (A) after loosening the screws.

Kia Picanto (JA) 2017-2026 Service & Repair Manual: Blower Resistor (Manual)