| Replacement |
Be
careful as the tailgate may fall down on people when the lifts are
removed. Have a helper hold the tailgate open, or use a secure method to
hold it open. |
| 1. | Using
a screwdriver (A), lift up slightly the socket clips (B) of both ends
on the lifter (D), and then remove the lifter from the bracket (C).
|
| 2. | Push the socket of the lifter into the bracket for installation.
|
Components and components location Component Location 1. Tailgate latch assembly Repair procedures Replacement Put on gloves to protect your hands.
Repair procedures Replacement Do not apply sealant to the body. 1. Remove the tailgate weatherstrip (A). 2. Install in the reverse order of removal.
Components and components location Component Location 1. Body control module (BCM) 2. Smart key unit (SMK) 3. Interior antenna 1 4. Interior antenna 2 5. FOB key 6. Start Stop Button (SSB) 7. Door handle & door antenna 8. Bumper antenna 9.
Repair procedures Inspection 1.Check for continuity between the terminals. If there is an abnormality, replace the switch. Removal • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.