| Components |
| [6:4 folding type] |

| 1. Rear seat cushion pad 2. Rear seat cushion covering 3. Rear seat back covering 4. Rear seat back pad 5. Rear seat headrest guide 6. Rear seat headrest | 7. Rear seat silence cloth 8. Rear seat back frame 9. Rear seat back upper bezel 10. Rear seat back tether anchor cover 11. Rear seat back webbing guide |
| [bench type] |

| 1. Rear seat cushion pad 2. Rear seat cushion covering 3. Rear seat back silence cloth 4. Rear seat back frame 5. Rear seat back webbing guide | 6. Rear seat back upper bezel 7. Rear seat back covering 8. Rear seat back pad 9. Rear seat headrest guide 10. Rear seat headrest |
Repair procedures Replacement 1. Loosen the rear door checker (B) mounting bolt. Tightening torque : 19.6 - 29.4 N·m (2.
Components and components location Component Location 1. Rear seat cushion assembly 2. Rear seat back assembly Repair procedures Replacement Put on gloves to protect your hands.
Components and components location Components Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the headlamp assembly. (Refer to Lighting System - "Headlamps") Installation 1.Install the headlamp assembly.
Repair procedures Inspection 1.Measure terminal - to - terminal resistance of blower resistor. 2.measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.Disconnect the negative (-) battery terminal.