Kia Picanto JA: Engine Mechanical System / Lubrication System

Kia Picanto (JA) 2017-{YEAR} Service & Repair Manual / Engine Mechanical System / Lubrication System

Muffler

Components and components location Components 1. Front muffler 2. Catalytic converter & Center muffler assembly 3. Rear muffler 4. Rubber hanger 5...

Flow diagram Flow Diagram Repair procedures Engine Oil And Filter Replacement • Prolonged and repeated contact with mineral oil will result in the removal of natural fats from the skin, leading to dryness, irritation and dermatitis...

Other information:

Kia Picanto (JA) 2017-2025 Service & Repair Manual: Rear Door Inside Handle

Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.• Be careful not to bend or scratch the trim and panels...

Kia Picanto (JA) 2017-2025 Owner's Manual: Air bag warning light

The purpose of the air bag warning light in your instrument panel is to alert you of a potential problem with your air bag - Supplemental Restraint System (SRS). When the ignition switch is turned ON, the warning light should illuminate for approximately 6 seconds, then go off...

Categories

Windshield defrosting and defogging

WARNING

Windshield heating

Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob or button to the position and fan speed control knob or button to the lower speed.

For maximum defrosting, set the temperature control to the extreme right/hot position and the fan speed control to the highest speed. If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position. Before driving, clear all snow and ice from the windshield, rear window, outside rear view mirrors, and all side windows. Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield.