Kia Picanto (JA): ISG (Idle Stop & Go) System / Hood switch

Kia Picanto (JA) 2017-2026 Service & Repair Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Hood switch

Description and operation

Description
The hood switch is included as the influencing factors in the calculation of the ISG function. If the hood is open, the engine must not be started or stopped by the ISG function for safety reasons.

Repair procedures

Inspection
1.
Disconnect the hood switch connector.

2.
Check for continuity between the terminals and ground as shown below.
(Refer to Body - "Hood Latch Assembly")

    Components and components location Component Location 1. Front seat belt buckle Repair procedures Replacement 1.Remove the front seat assembly.

    Specifications Specifications Item Specifications Working voltage DC 12.5V Operating force Initial position : 0.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Rear Combination Lamp

    Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the rear combination lamp (A) after loosening the screws. 3.Remove the rear combination lamp packing (A). 4.Disconnect the rear combination lamp connector (A).

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Power Door Lock Module

    Components and components location Components 1. Door lock/unlock knob cable 2. Door inside handle cable 3. Door latch assembly Repair procedures Inspection    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0217