| Component Location |

| 1. Headlamp leveling actuator | 2. Headlamp leveling switch |
| ※ headlamp leveling actuator is built into the headlamp. |
Components and components location Component Location I/P Junction Box Circuit (I/P Junction Box) Description and operation Description Communication Network Diagram Abbreviation Explanation ABS Anti-lock Brake System ACU Airbag Control Unit AEB Autonomous Emergency Braking B-CAN Body Controller Area Network BCM Body Control Module C-CAN Chassis Controller Area Network CLU Cluster Module DATC Dual Automatic Temp Control EMS Engine Management System ESC Electronic Control Suspention EVP Eva Vacuum Pump I-BOX Telematics System LPI Liquid Petroleum Injection H_U Head Unit (Audio / AVN) M-CAN Multi media Controller Area Network MDPS Motor Driven Power Steering PGS Parking Guide System SLM Seat belt remind & Lighting Module SMK Smart Key Unit TCU Transmission Control Unit TMU Telematics System TPMS Tire Pressure Monitoring System Repair procedures Fuse Inspection 1.
Components and components location Components Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the headlamp assembly.
Repair procedures Inspection 1.In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS).The diagnostic system (KDS/GDS) provides the following information.(1)Self diagnosis : Checking failure and code number (DTC)(2) Current data : Checking the system input/output data state (3)Actuation
Repair procedures Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position as shown below. Rear Wiper & Washer Switch[LHD] [RHD] Inspection (With KDS/GDS) 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS).