Kia Picanto: Body Electrical System / Lighting System

Kia Picanto JA 2017-2025 Service & Repair Manual / Body Electrical System / Lighting System

Specifications

Specification

Item				Type	Bulb Watt (W)
Front	Headlamp	Halogen (Position lamp)	Low/High	H4 LL	55/60
			Turn signal lamp	PY21WLL	21
			Position lamp	W5WLL	5
		Halogen (Position lamp + DRL)	Low/High	HB3 (9005HL+)	60
			Turn signal lamp	LED	LED
			Position lamp	LED	LED
			Daytime Running Light (DRL)	LED	LED
	Front fog lamp			HB4	51
	Turn signal lamp (Side)			WY5W	5
	Door mirror turn signal lamp			LED	LED
Rear	Rear combination lamp	Bulb Type	Tail lamp	W5WLL	5
			Tail / Stop lamp	P21/5WLL	21
			Turn signal lamp	PY21WLL	21
			Back up lamp	W16W	16
		LED Type	Tail lamp	LED	LED
			Tail / Stop lamp	LED	LED
			Turn signal lamp	PY21WLL	21
			Back up lamp	W16W	16
	High mounted stop lamp	Bulb Type		W5WLL	5
	License plate lamp			W5WLL	5
Interior	Map lamp			W10W	10
	Room lamp			FESTOON	8
	Luggage lamp			FESTOON	8
	Glove box lamp			W5W	10

Components and components location

Component Location

1 . Headlamp (Low/High Bi-function)
2. Position lamp
3. Turn signal lamp

4 . Daytime Running Light (DRL)
5. Turn signal lamp (Door mirror / Side)
6. Map lamp

1 . Tail lamp
2. Stop / Tail lamp
3 . Turn signal lamp

4 . Back up lamp
5 . High mounted stop lamp
6 . License lamp

Keyless Entry And Burglar Alarm

Specifications Specification Item Specification Power source 3 V Operating temperature -22 - 167°F (-30 - 75°C) RF Modulation ...

Headlamps

Description and operation Description BI-FUNCTION 1. Definition – A headlamp with integrated functions of high and low beam – The lig ...

Other information:

Kia Picanto JA 2017-2025 Service & Repair Manual: Brake Booster Vacuum Pressure Sensor

Description and operation Description In order to ensure adequate brake power assistance in every situation, the brake booster is equipped with a partial vacuum sensor. The brake booster vacuum pressure sensor is located beside the brake booster. Repair procedures Inspec ...

Kia Picanto JA 2017-2025 Service & Repair Manual: Rear Wiper Motor

Repair procedures Inspection Rear Wiper Motor 1.Remove the connector from the rear wiper motor. 2.Connect positive (+) battery cables to terminal 1 and negative (-) battery cables to terminal 2 respectively. 3.Check that the motor operates normally. If they are abnormal, replace the washer ...