Kia Picanto: Lighting System / High Mounted Stop Lamp

Kia Picanto JA 2017-2025 Service & Repair Manual / Body Electrical System / Lighting System / High Mounted Stop Lamp

Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Open the tailgate.

3.	Loosen the high mounted stop lamp mounting nuts (A).

4.	Disconnect the washer nozzle (A) and high mounted stop lamp connector (B).

5.	Remove the high mounted stop lamp (C).

Installation

1.	Connect the washer nozzle and high mounted stop lamp connector.

2.	Install the high mounted stop lamp.

3.	Connect the negative (-) battery terminal.

License Lamps

Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp assembly (A) after pressing the locking pin. 3. Disconnect the license lamp connecto ...

Rear Combination Lamp

Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the rear combination lamp (A) after loosening the screws. 3.Remove the rear combination lamp packing (A). ...

Other information:

Kia Picanto JA 2017-2025 Service & Repair Manual: Hood switch

Description and operation Description The hood switch is included as the influencing factors in the calculation of the ISG function. If the hood is open, the engine must not be started or stopped by the ISG function for safety reasons. Repair procedures Inspection 1.Disconn ...

Kia Picanto JA 2017-2025 Owner's Manual: Hill-start assist control (HAC)

Hill start Assist Control is a comfort function. The main intend is to prevent the vehicle from rolling backwards while driving off uphill on an inclined surface. HAC holds the braking pressure built-up by driver during stopping procedure for 2 seconds after releasing brake pedal. Dur ...