Kia Picanto: Lighting System / Turn Signal Lamp

Kia Picanto JA 2017-2023 Service & Repair Manual / Body Electrical System / Lighting System / Turn Signal Lamp

Repair procedures
Removal
Door Mirror Turn Signal Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mirror (A) from the mirror holder.

   
Be careful not to damage the fixing clips (A).

3.
Disconnect the heating connectors (A) from the mirror.

4.
Remove the door mirror cover (A) after separating the mounting clips.

   
Be careful not to damage the fixing clips (A).

5.
Remove the door mirror housing (A) after loosening the mounting screw.

6.
Remove the door mirror turn signal lamp (A) after loosening the screw.

7.
Disconnect the connector (A) from the door mirror turn signal lamp (B).

Installation
1.
Install the door mirror turn signal lamp.
2.
Install the door mirror housing.
3.
Install the door mirror cover.
4.
Install the door mirror.
5.
Connect the negative (-) battery terminal.
Headlamps
Description and operation Description BI-FUNCTION 1. Definition – A headlamp with integrated functions of high and low beam – The lig ...

Map Lamp
Repair procedures Removal    • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver ...

Other information:

Kia Picanto JA 2017-2023 Owner's Manual: Fuses


Right side : Blown A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the others in the engine compartment near the battery. If any of your vehicle’s lights, ...

Kia Picanto JA 2017-2023 Owner's Manual: Front seat adjustment


Forward and backward To move the seat forward or backward: 1. Pull the seat slide adjustment lever up and hold it. 2. Slide the seat to the position you desire. 3. Release the lever and make sure the seat is locked in place. Adjust the seat before driving, and make sure the seat is lo ...

Copyright © www.kpicanto.com 2017-2023