Kia Picanto: Lighting System / Front Fog Lamps
Repair procedures
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the front bumper assembly.
(Refer to Body - "Front Bumper Assembly")
|
3. | Remove the front fog lamp assembly (A) after loosening the mounting screws.
 |
1. | Remove the engine room under cover.
G 1.0 MPI (Refer to Engine Mechanical System - "Engine Room Under Cover")
G 1.2 MPI (Refer to Engine Mechanical System - "Engine Room Under Cover")
|
2. | Remove the front fog lamp socket (A) after turning in the counterclockwise direction.
 |
1. | Install the front fog lamp assembly. |
2. | Install the front bumper assembly. |
3. | Connect the negative (-) battery terminal. |
Repair procedures
Inspection
1.Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch.
No.
...
Repair procedures
Removal
1. Disconnect the negative (-) battery terminal.
2. Remove the license lamp assembly (A) after pressing the locking pin.
3. Disconnect the license lamp connecto ...
Other information:
The transmitter uses a 3 volt lithium
battery which will normally last for
several years. When replacement is
necessary, use the following procedure.
1. Insert a slim tool into the slot and
gently pry open the transmitter
center cover.
2. Replace the battery with a new
battery (CR203 ...
Components and components location
Component Location
1. Crash pad center lower panel
Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to ...