Kia Picanto: Lighting System / Rear Combination Lamp

Kia Picanto JA 2017-2024 Service & Repair Manual / Body Electrical System / Lighting System / Rear Combination Lamp

Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear combination lamp (A) after loosening the screws.

3.
Remove the rear combination lamp packing (A).

4.
Disconnect the rear combination lamp connector (A).

Back up lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper assembly.
(Refer to Body - "Rear bumper Assembly")
3.
Disconnect the back up lamp connector (A).

4.
Remove the back up lamp (A) after loosening the screws.

Bulb Replacement
Turn Signal Lamp
1.
Remove the rear combination lamp.
2.
Remove the turn signal lamp bulb (B) by turning the socket (A) counterclockwise.

Back Up Lamp
1.
Remove the rear tire.
2.
Remove the rear wheel guard (A) after loosening the mounting screws and clips.

3.
Remove the back up lamp bulb (B) by turning the socket (A) counterclockwise.

Installation
Rear Combination Lamp
1.
Connect the rear combination lamp connector.
2.
Install the rear combination lamp.
3.
Connect the negative (-) battery terminal.
Back Up Lamp
1.
Install the back up lamp.
2.
Install the rear bumper assembly.
3.
Connect the negative (-) battery terminal.
High Mounted Stop Lamp
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Open the tailgate. 3. Loosen the high mounted stop lamp mounting nuts (A). 4. Disconnect the washer nozzle ...

Multifunction Switch
Specifications Specifications Items Specifications Rated voltage DC 12 V Operating temperature range -22 - 176°F (-30 - 80°C) ...

Other information:

Kia Picanto JA 2017-2024 Owner's Manual: Stopping the Engine


Manual Transaxle 1. When the vehicle is stationary, depress the clutch and brake pedal at the same time. 2. With the clutch and brake pedal depressed, shift the shift lever into N (Neutral). 3. With the brake pedal depressed, apply the parking brake. 4. Turn the ignition switch to the ...

Kia Picanto JA 2017-2024 Service & Repair Manual: Crankshaft Damper Pulley


Repair procedures Removal and Installation 1.Remove the engine room under cover and RH side cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") 2.Remove the drive belt. (Refer to Drive Belt System - "Drive Belt") 3.Remove the RH s ...

Copyright © www.kpicanto.com 2017-2024