| Replacement |
| 1. | Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
|
| 2. | Remove the sunroof sunshade.
(Refer to Sunroof - "Sunroof Sunshade")
|
| 3. | Push down the slide and remove the drip link assembly (A).
|
| 4. | Separate the drip link (B) and guide (A).
|
| 5. | Remove the shoe (A).
|
| 6. | Separate the guide assembly (A) and the cable (B) by pushing them in the direction of the arrow.
|
| 7. | Install in the reverse order of removal.
|
Repair procedures Replacement 1.Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") 2.Remove the drip rail assembly (A) after loosening the mounting screws.
Components and components location Component Location 1. Quarter fixed glass Repair procedures Replacement Put on gloves to protect your hands.
Specifications Specifications Items Specifications Rated voltage DC 12 V Operating temperature range -22 - 176°F (-30 - 80°C) Rated load Washer Washer : 6A (Motor load) Components and components location Component 1 .
Components and components location Components Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the rear bumper assembly. (Refer to Body - "Rear Bumper Assembly") 3.Disconnect the connector (A) from the ultrasonic sensor.