Kia Picanto JA: Safety features of your vehicle

1. Engine coolant reservoir 2. Engine oil filler cap 3. Brake / clutch fluid reservoir 4. Air cleaner 5. Fuse box 6. Negative battery terminal 7...

Seats

Driver’s seat 1. Forward and backward 2. Seatback angle 3. Seat cushion height* 4. Headrest Front passenger’s seat 5. Forward and backward 6...

Other information:

Kia Picanto (JA) 2017-2025 Service & Repair Manual: AVN(Audio Video Navigation) head unit

Components and components location Components Connector Pin Information No. Connector A Connector B 1 Rear door left speaker (+) - 2 Rear door left speaker (-) MIC (+) 3 - - 4 - - 5 - Antenna power 6 Camera power Illumination (+) 7 Camera video Non E-Call type : - E-Call type : Multmedia-CAN (High) 8 - - 9 - ALT Left_output (-) 10 AUX Audio_right input Battery (+) 11 AUX Detect Battery (+) 12 Steering wheel remote controller Ground 13 Front door left speaker (+) Ground 14 Front door left speaker (-) - 15 Front door right speaker (-) MIC (-) 16 Front door right speaker (+) - 17 - - 18 - - 19 - Default : Ground Option : Illumination (-) 20 Camera power_Ground Non E-Call type : - E-Call type : Multmedia-CAN (Low) 21 Camera video_Ground - 22 - ACC 23 - - 24 AUX Audio_left input - 25 AUX Audio_Ground Reverse 26 Steering wheel remote controller (Ground) Door open 27 Rear door right speaker (-) Door unlock status 28 Rear door right speaker (+) Parking brake 29 - 'P' Position 30 - Auto light 31 - - 32 - - 33 Camera shield_Ground IGN1 34 - - 35 - - 36 - 37 - 38 Vehicle speed Repair procedures Removal • Be careful not to scratch the center fascia upper panel and related parts...

Kia Picanto (JA) 2017-2025 Service & Repair Manual: CVVT & Camshaft

Description and operation Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load...

Categories

Windshield defrosting and defogging

WARNING

Windshield heating

Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob or button to the position and fan speed control knob or button to the lower speed.

For maximum defrosting, set the temperature control to the extreme right/hot position and the fan speed control to the highest speed. If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position. Before driving, clear all snow and ice from the windshield, rear window, outside rear view mirrors, and all side windows. Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield.