

Your vehicle is equipped with a Supplemental Restraint (Air Bag) System and lap/shoulder belts at both the driver and passenger seating positions.
The indications of the system's presence are the letters "AIRBAG" engraved on the air bag pad cover in the steering wheel and the passenger's side front panel pad above the glove box.
The SRS consists of air bags installed under the pad covers in the center of the steering wheel and the passenger's side front panel above the glove box.
The purpose of the SRS is to provide the vehicle's driver and/or the front passenger with additional protection than that offered by the seat belt system alone in case of a frontal impact of sufficient severity.
WARNING
The driver's hands should be placed on the steering wheel at the 9:00 and 3:00 positions. The passenger's arms and hands should be placed on their laps.
WARNING
Always use seat belts and child restraints – every trip, every time, everyone! Air bags inflate with considerable force and in the blink of an eye. Seat belts help keep occupants in proper position to obtain maximum benefit from the air bag. Even with air bags, improperly belted and unbelted occupants can be severely injured when the air bag inflates. Always follow the precautions about seat belts, air bags and occupant safety contained in this manual. To reduce the chance of serious or fatal injuries and receive the maximum safety benefit from your restraint system:
Passenger’s front air bag ON/OFF switch

The passenger’s front air bag can be deactivated by the passenger’s front air bag ON/OFF switch if a child restraint is installed on the front passenger's seat or if the front passenger's seat is unoccupied by a person. To ensure the safety of your child, the passenger’s front air bag must be deactivated when it should be necessary to install a rearward facing child seat on the front passenger seat in exceptional circumstances.
To deactivate or reactivate the passenger’s front air bag:

To deactivate the passenger’s front air
bag, insert the master key into the
passenger’s front air bag ON/OFF
switch and turn it to the OFF position.
The passenger’s front air bag OFF indicator
(
) will illuminate and stay on
until the passenger’s front air bag is reactivated.
To reactivate the passenger’s front air bag, insert the master key into the passenger’s front air bag ON/OFF switch and turn it to the ON position.
The passenger’s front air bag OFF indicator
will go out and the passenger’s
front air bag ON indicator (
) will
illuminate
for approximately 60 seconds.
WARNING
The front air bag ON/OFF switch could turn by using a similar small rigid device. Always check the status of the front air bag ON/OFF switch and passenger's front air bag ON/OFF indicator.
NOTICE
CAUTION
) on the instrument
panel will
illuminate.
And, the passenger's front air bag
OFF indicator (
) will not
illuminate
(The passenger's front air
bag ON indicator comes on and
goes off after approximately
60 seconds), the SRS Control Module
reactivate the passenger’s
front air bag and the passenger’s
front air bag will inflate in frontal
impact crashes even if the passenger’s
front air bag ON/OFF
switch is set to the OFF position.
In this case, have the system inspected
by a professional workshop.
Kia recommends to visit an
authorized Kia dealer/service partner.WARNING
WARNING
No attaching objects
No objects (such as crash pad cover, cellular phone holder, cup holder, perfume or stickers) should be placed over or near the air bag modules on the steering wheel, instrument panel, windshield glass, and the front passenger's panel above the glove box. Such objects could cause harm if the vehicle is in a crash severe enough to cause the air bags to deploy. Do not place any objects over the air bag or between the air bag and yourself.
SRS components and functionsThe SRS consists of the following components: 1. Driver's front air bag module 2. Passenger's front air bag module 3. Side air bag modules 4...
Side air bagYour vehicle is equipped with a side air bag in each front seat. The purpose of the air bag is to provide the vehicle's driver and the front passenger with additional protection than that offered by the seat belt alone...
1. Open the hood. 2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly. 3. Remove the bulb from bulb-socket by pulling it out...
Specifications Specification Temperature[⁰C(⁰F)] Resistance(kΩ) -40(-40) 811.1 - 956.8 -20(-4) 255.6 - 287.7 0(32) 91.5 - 98.8 20(68) 36.6 - 38.0 30(86) 23.8 - 24.7 40(104) 15...

The LCD Window modes can be changed by using the control buttons on the steering wheel.
- Type A
1. TRIP : TRIP button for changing
modes.
2. RESET : RESET button for resetting
the selected item.
- Type B
1.
: MODE button for change the
LCD MODES
2. ˄/˅ :
MOVE scroll switch for select
the items
3. OK : SET/RESET button for set the
items or reset the items