| Inspection |
Stroke : 5 - 7 clicks |
Repair procedures Inspection 1. Check the drive shaft boots for loose clamps, cracks, grease leaks, kinks or damage.
Repair procedures Inspection 1. Check the steering wheel free road. (1) Turn the steering wheel so that the front wheels can face straight ahead.
Repair procedures Inspection 1.Disconnect the key warning switch connector (A) and ignition switch connector (B) from the steering column. 2.Check for continuity between the terminals. 3.If continuity is not specified, replace the switch.
Repair procedures Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position as shown below. Rear Wiper & Washer Switch[LHD] [RHD] Inspection (With KDS/GDS) 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS).