Other information:
Repair procedures
Replacement
1.Disconnect the negative (-) battery terminal.
2.Remove the heater unit.
(Refer to Heater - "Heater Unit")
3.Remove the heater core cover (A) after loosening the mounting screws.
4.Pull out the heater core (A) from the heater unit.
Components and components location
Components
[NON ISG]
Connector pin function
No.
Connector A
Connector B
1 Low Battery 2 Common Illumination (+) 3 Ground HTD 4 Middle (Low) ISG Battery 5 Middle (High) - 6 High Detent out (-) 7 - 8 Sen