Kia Picanto (JA): Body Electrical System / Audio

Specifications

Specifications
Items
Specifications
Model
Radio /MP3 /Bluetooth (A Type)
Radio /MP3 /Bluetooth (B Type)
Power supply
DC 14.4 V
Parasitic current
Max. 1mA (Head unit only)
Antenna
80PF 75Ω
Tuning type
PLL SYNTHESIZED TUNING

Components and components location

Component Location

1. Audio unit
2. Tweeter speaker
3. Front door speaker
4. Rear door speaker
5. Antenna feeder cable
6. Roof antenna (AM/FM)
7. Antenna cable connector

General information General Troubleshooting Information Before Troubleshooting 1.Check applicable fuses in the appropriate fuse/relay box. 2.Check the battery for damage, state of charge, cleanliness and tight connections.

Components and components location Components [Radio/MP3/Bluetooth (A Type)] Connector Pin Information No. Connector A Connector B 1 Rear door left speaker (+) - 2 Rear door left speaker (-) MIC (+) 3 USB Ground - 4 USB Data (+) Detent 5 USB Data (-) Antenna power 6 USB VCC Illumination (+) 7 - Non E-Call type : - E-Call type : Multmedia-CAN (High) 8 - - 9 - - 10 AUX Audio_right input Battery (+) 11 AUX Detect Battery (+) 12 Steering wheel remote controller Ground 13 Front door left speaker (+) Ground 14 Front door left speaker (-) - 15 Front door right speaker (-) MIC (-) 16 Front door right speaker (+) - 17 - - 18 - Vehicle speed 19 - Illumination (-) 20 - Non E-Call type : - E-Call type : Multmedia-CAN (Low) 21 - - 22 - ACC 23 - - 24 AUX Audio_left input - 25 AUX Audio_Ground - 26 Steering wheel remote controller (Ground) - 27 Rear door right speaker (-) - 28 Rear door right speaker (+) - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 - 37 - 38 - [Radio/MP3/Bluetooth (B Type)] Connector Pin Information No.

Other information:

Kia Picanto (JA) 2017-2026 Service & Repair Manual: Rear Combination Lamp

Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the rear combination lamp (A) after loosening the screws. 3.Remove the rear combination lamp packing (A). 4.Disconnect the rear combination lamp connector (A).

Kia Picanto (JA) 2017-2026 Service & Repair Manual: Power Door Lock Switch

Repair procedures Inspection 1.Check for continuity between the terminals. If there is an abnormality, replace the switch. Removal    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

Categories

 
Copyright © 2026 www.kpicanto.com - 0.0201