| Replacement |
| 1. | Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
|
| 2. | Remove the rear door belt outside weatherstrip (A) after loosening the mounting screw.
|
| 3. | Install in the reverse order of removal.
|
Repair procedures Replacement 1. Pull down the rear door window glass to the lowest level by pressing the power window glass switch. 2. Remove the rear door belt outside weatherstrip (A) after loosening the mounting screw.
Repair procedures Replacement 1. Loosen the rear door checker (B) mounting bolt. Tightening torque : 19.6 - 29.4 N·m (2.
Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly") 3.Remove the front fog lamp assembly (A) after loosening the mounting screws.
Components and components location Component Location 1. Windshield wiper arm & blade 2. Wiper & washer switch 3. Windshield washer hose & nozzle 4. Wiper motor & linkage assembly 5. Washer motor 6. Washer reservoir tank 7. Wiper/Washer relay 8.