| Replacement |
| 1. | Pull down the rear door window glass to the lowest level by pressing the power window glass switch. |
| 2. | Remove the rear door belt outside weatherstrip (A) after loosening the mounting screw.
|
| 3. | Install in the reverse order of removal.
|
Components and components location Component Location 1. Rear door latch Repair procedures Replacement Put on gloves to protect your hands.
Repair procedures Replacement 1.Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2.Remove the rear door belt outside weatherstrip (A) after loosening the mounting screw.
Schematic diagrams Circuit Diagram Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3.Remove the crash pad side switch (A) after loosening the mounting screws.
Specifications Specification Item Specification Ultrasonic sensor Voltage rating DC 12V Detecting range 11.8 - 39.3 in (30 - 100 cm) Operation voltage DC 9 - 16 V Operation current 60mA Max.