The alarm will be activated if any of the following occurs while the system is armed.
Using the smart key Park the vehicle and stop the engine. Arm the system as described below. 1. Turn off the engine. 2. Make sure that all doors (and tailgate) and the engine hood are closed and latched.
The system will be disarmed when: Transmitter - The door unlock button is pressed. - The engine is started. - The ignition switch is in the “ON” position for 30 seconds or more.
Components and components location Components Connector Pin Information No. Connector A Connector B Connector C 1 - IGN2 Relay_output Battery (+)_Signal 2 SSB Switch1 signal_input P-CAN (Low) - 3 Driver door o
Repair procedures Inspection Self Diagnosis With Scan Tool It will be able to diagnose defects of SMART KEY system with KDS/GDS quickly. KDS/GDS can operates actuator forcefully, input/output value monitoring and self diagnosis. The following three features will be major problem in SMART KEY system.