| Replacement |
| 1. | Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
| 2. | Remove the front door belt inside weatherstrip (A).
|
| 3. | Install in the reverse order of removal.
|
Components and components location Component Location 1. Front door latch Repair procedures Replacement Put on gloves to protect your hands.
Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Repair procedures Inspection Rear Wiper Motor 1.Remove the connector from the rear wiper motor. 2.Connect positive (+) battery cables to terminal 1 and negative (-) battery cables to terminal 2 respectively. 3.Check that the motor operates normally.
Components and components location Component Location 1. Intake Actuator Description and operation Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit.