| Component Location |

| 1. Console armrest |
| Replacement |
Put on gloves to protect your hands. |
|
| 1. | Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
|
| 2. | Remove the rear console cover.
(Refer to Floor Console - "Rear Console Cover")
|
| 3. | Loosen the mounting screws (A) and remove the console armrest (B).
|
| 4. | Install in the reverse order of removal.
|
Components and components location Component Location 1. Rear console cover Repair procedures Replacement Put on gloves to protect your hands.
Components and components location Components 1. Front bumper cover assembly 2. Front bumper upper side bracket 3. Front bumper side bracket 4.
Repair procedures Removal • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Components and components location Component Schematic diagrams Circuit Diagram [Folding Mirror Type] [Non-Folding Mirror Type] Repair procedures Inspection 1.Check for continuity between the terminals in each switch position according to the table.