| Component Location |

| 1. Front seat shield inner cover |
| Replacement |
Put on gloves to protect your hands. |
|
| 1. | Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
| 2. | Using a remover, remove the front seat shield inner cover (A).
|
| 3. | Install in the reverse order of removal.
|
Components and components location Component Location 1. Front seat shield outer cover Repair procedures Replacement Put on gloves to protect your hands.
Components and components location Component Location 1. Front seat back cover Repair procedures Replacement Put on gloves to protect your hands.
Repair procedures Inspection 1.Check for continuity between the terminals. If there is an abnormality, replace the switch. Removal • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Repair procedures Inspection Rear Wiper Motor 1.Remove the connector from the rear wiper motor. 2.Connect positive (+) battery cables to terminal 1 and negative (-) battery cables to terminal 2 respectively. 3.Check that the motor operates normally.