| Component Location |

| 1. Rear seat belt buckle [RH] | 2. Rear seat belt buckle [LH] |
| Replacement |
When installing the belt, be careful not to damage the retractor. |
| 1. | Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
| 2. | Remove the rear seat belt buckle (A) after loosening the mounting bolt.
[LH]
[RH]
|
| 3. | Install in the reverse order of removal. |
Components and components location Component Location 1. Rear center seat belt retractor Repair procedures Replacement When installing the belt, be careful not to damage the retractor.
Components and components location Components (1) [Normal] 1. Sunvisor assembly 2. Headlining complete assembly 3. Roof assist handle assembly 4.
Repair procedures Inspection Rear Wiper Motor 1.Remove the connector from the rear wiper motor. 2.Connect positive (+) battery cables to terminal 1 and negative (-) battery cables to terminal 2 respectively. 3.Check that the motor operates normally.
Repair procedures Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position as shown below. Rear Wiper & Washer Switch[LHD] [RHD] Inspection (With KDS/GDS) 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS).