Other information:
Components and components location
Components
1. Engine mounting bracket 2. Roll rod bracket 3. Transaxle mounting bracket
Repair procedures
Removal and Installation
Engine Mounting Bracket
1. Remove the engine room under cover and RH side cover.
(Refer to Engi ...
Repair procedures
Removal
1. Remove the wheel tire (A).
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
2. Loosen the wheel speed sensor bracket bolts (A),(B) and then disconnect the wheel speed sensor connector (C).
3. Install ...