Kia Picanto: Light bulbs / Map lamp bulb replacement
WARNING
Prior to working on the Interior
lamps, ensure that the “OFF” button
is depressed to avoid burning your
fingers or receiving an electric shock.
1. Using a flat-blade screwdriver, gently
pry the lens cover from lamp
housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
CAUTION
Be careful not to dirty or damage
the lens, lens tab, and plastic housings.
1. Using a flat-blade screwdriver, gently
pry the lens cover from lamp
housing.
2. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the
socket ...
If the vanity mirror lamp bulb (LED
type) (1) does not operate, have your
vehicle checked by a professional workshop.
Kia recommends to visit an authorized
Kia dealer/service partner. ...
Other information:
Components and components location
Component
Schematic diagrams
Circuit Diagram
[Folding Mirror Type]
[Non-Folding Mirror Type]
Repair procedures
Inspection
1.Check for continuity between the terminals in each switch position according to the table.
...
Components and components location
Components
Repair procedures
Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the rear bumper assembly.
(Refer to Body - "Rear Bumper Assembly")
3.Disconnect the connector (A) from the ultrasonic sensor. ...