Kia Picanto (JA): Towing / Towing service

If emergency towing is necessary, we recommend having it done by an authorized Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary to prevent damage to the vehicle. The use of wheel dollies (1) or flatbed is recommended.

It is acceptable to tow the vehicle with the rear wheels on the ground (without dollies) and the front wheels off the ground.

If any of the loaded wheels or suspension components are damaged or the vehicle is being towed with the front wheels on the ground, use a towing dolly under the front wheels.

When being towed by a commercial tow truck and wheel dollies are not used, the front of the vehicle should always be lifted, not the rear.

CAUTION

  • Do not tow the vehicle backwards with the front wheels on the ground as this may cause damage to the vehicle.
  • Do not tow with sling-type equipment. Use wheel lift or flatbed equipment.

When towing your vehicle in an emergency without wheel dollies :

1. Set the ignition switch in the ACC position.

2. Place the transaxle shift lever in N (Neutral).

3. Release the parking brake.

CAUTION

Failure to place the transaxle shift lever in N (Neutral) may cause internal damage to the transaxle.

    1. Open the tailgate, and remove the towing hook from the tool case. 2. Remove the hole cover pressing the upper (front) part of the cover on the bumper.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Power Window Motor

    Components and components location Components [Standard Window Motor] [Safety Window Motor] Repair procedures Inspection    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Heater Core

    Repair procedures Replacement 1.Disconnect the negative (-) battery terminal. 2.Remove the heater unit. (Refer to Heater - "Heater Unit") 3.Remove the heater core cover (A) after loosening the mounting screws. 4.Pull out the heater core (A) from the heater unit.

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0213