Kia Picanto JA: Specifications & Consumer information / Tires and Wheels

Kia Picanto (JA) 2017-{YEAR} Owner's Manual / Specifications & Consumer information / Tires and Wheels

For Europe

Except Europe

NOTICE

  • We recommend that when replacing tires, use the same originally supplied with the vehicles. If not, that affects driving performance.
  • When driving in high altitude grades, it is natural for the atmospheric pressure to decrease. Therefore, please check the tire pressure and add more air when necessary. Additionally required tire air pressure per km above sea level: 1.5 psi/km

CAUTION

When replacing tires, use the same size originally supplied with the vehicle. Using tires of a different size can damage the related parts or make it work irregularly.

    Engine, Dimensions, Bulb wattage

    E..

    Weight/Volume, Air conditioning system

    Weight/Volume Air conditioning system Please contact a professional workshop for more details. Kia recommends to contact an authorized Kia dealer/service partner...

    Other information:

    Kia Picanto (JA) 2017-2025 Service & Repair Manual: Severe Condition


    General market Maintenance Under Severe Usage Conditions - For Gasoline Engine [Except Europe (Including Russia)] MAINTENANCE ITEM MAINTENANCE OPERATION MAINTENANCE INTERVALS DRIVING CONDITION Engine oil and engine oil filter Kappa 1...

    Kia Picanto (JA) 2017-2025 Service & Repair Manual: Hood Latch


    Components and components location Component Location 1. Hood lower latch assembly Repair procedures Replacement 1. Disconnect the hood latch connector (A). 2. Remove the hood lower latch assembly (A) after loosening the bolts...

    Categories

    Windshield defrosting and defogging

    WARNING

    Windshield heating

    Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob or button to the position and fan speed control knob or button to the lower speed.

    For maximum defrosting, set the temperature control to the extreme right/hot position and the fan speed control to the highest speed. If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position. Before driving, clear all snow and ice from the windshield, rear window, outside rear view mirrors, and all side windows. Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield.

    read more

     
    Copyright © 2025 www.kpicanto.com