
1. Headlamp (Low/High)
2. Front turn signal lamp
3. Position lamp
4. Front turn signal lamp (LED type)
5. Position lamp (LED type)
6. Day time running lamp (LED type)



1. Front fog lamp
2. Day time running lamp (bulb type)
Please prepare bulbs with appropriate standards in case of emergencies. Refer to “Bulb Wattage” on page 9-04. When changing bulbs and sorts, first turn off the engine at a safe place, firmly apply the side brake and take out the battery's negative (-) terminal.
1. Rear turn signal lamp (Bulb type) 2. Tail lamp (BULB type) 3. Stop and tail lamp (BULB type) 4. Tail lamp (LED type) 5. Stop and tail lamp (LED type) 1.
Components and components location Component The eCall unit for AVN is equipped in AVN head unit. Repair procedures Removal Carry out the Test Mode in the following cases.– Replacing the eCall unit– Replacing the Bac
Schematic diagrams Circuit Diagram Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3.Remove the crash pad side switch (A) after loosening the mounting screws.