
1. Rear turn signal lamp (Bulb type)
2. Tail lamp (BULB type)
3. Stop and tail lamp (BULB type)
4. Tail lamp (LED type)
5. Stop and tail lamp (LED type)



1. Back up lamp (Bulb type)
2. Rear fog lamp (BULB type)
1. Headlamp (Low/High) 2. Front turn signal lamp 3. Position lamp 4. Front turn signal lamp (LED type) 5. Position lamp (LED type) 6. Day time running lamp (LED type) 1.
1. Side repeater lamp (LED type) 2. Side repeater lamp (bulb type)
Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly") 3.Remove the front fog lamp assembly (A) after loosening the mounting screws.
Repair procedures Inspection 1.Measure terminal - to - terminal resistance of blower resistor. 2.measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.Disconnect the negative (-) battery terminal.