
The ISG system will operate under the following condition: - The driver’s seat belt is fastened. - The driver’s door and hood are closed. - The brake vacuum pressure is adequate.
The system may not operate when: - The ISG related sensors or system error occurs. The yellow AUTO STOP indicator ( ) on the instrument cluster will stay on after blinking for 5 seconds and the light on the ISG OFF button will illuminate.
Repair procedures Inspection 1.Check for continuity between the terminals. If there is an abnormality, replace the switch. Removal • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Repair procedures Inspection 1.Measure terminal - to - terminal resistance of blower resistor. 2.measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.Disconnect the negative (-) battery terminal.