To reduce the possibility of fogging up
the inside of the windshield, the air intake
or air conditioning are controlled
automatically according to certain conditions
such as or position. To
cancel
or
return to the defogging logic,
do the following.
Automatic climate control system

1. Turn the ignition switch to the ON position.
2. Select the defrost position pressing
defrost button (
).
3. While holding the air conditioning button (A/C) pressed, press the air intake control button at least 5 times within 3 seconds.
The air intake control button indicator blinks 3 times. It indicates that the defogging logic is canceled or returned to the programmed status.
If the battery has been discharged or disconnected, it is reset to the defog logic status.
To defog inside windshield 1. Set the fan speed to the desired position. 2. Select desired temperature. 3. Press the defrost button ( ). 4. The air conditioning will be turned on according to the detected ambient temperature and outside (fresh) air position will be selected automatically.
These compartments can be used to store small items required by the driver or passengers. CAUTION To avoid possible theft, do not leave valuables in the storage compartments.
Repair procedures Inspection 1.With the washer motor connected to the reservoir tank, fill the reservoir tank with water. Before filling the reservoir tank with water, check the filter for foreign material or contamination.
Repair procedures Inspection 1.Measure terminal - to - terminal resistance of blower resistor. 2.measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.Disconnect the negative (-) battery terminal.