Kia Picanto: Engine And Transaxle Assembly / Engine Room Under Cover

Kia Picanto JA 2017-2024 Service & Repair Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Room Under Cover

Repair procedures
Removal and Installation
Engine Room Under Cover
1.
Remove the engine room under cover (A).
Tightening torque :
7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)

2.
Install in the reverse order of removal.
Engine Room Side Cover
1.
Remove the engine room side covers (A).
Tightening torque :
7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)
[LH]

[RH]

2.
Install in the reverse order of removal.
Engine And Transaxle Assembly
...

Engine Mounting
Components and components location Components 1. Engine mounting bracket 2. Roll rod bracket 3. Transaxle mounting bracket Repair procedures Removal and Installation Engine ...

Other information:

Kia Picanto JA 2017-2024 Service & Repair Manual: Brake Line


Components and components location Components Repair procedures Removal 1.Remove the brake fluid level sensor connector. 2.Remove the brake fluid from the master cylinder reservoir with a syringe.    Do not spill brake fluid on the vehicle as it may dam ...

Kia Picanto JA 2017-2024 Service & Repair Manual: Rear Torsion Beam Axle


Components and components location Components [Disc type] 1. Torsion beam axle 2. Brake disc 3. Brake caliper [Drum type] 1. Torsion beam axle 2. Drum brake Repair procedures Replacement 1.Switch "OFF" ignition and disconnect the negative (-) battery terminal ...

Copyright © www.kpicanto.com 2017-2024