Other information:
Repair procedures
Removal
1. Remove the wheel tire (A).
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
2. Loosen the wheel speed sensor bracket bolts (A),(B) and then disconnect the wheel speed sensor connector (C).
3. Install ...
Components and components location
Components
Repair procedures
Inspection
1. Disconnect the negative (-) battery terminal.
2. Remove the map lamp lens (A).
3. Remove the map lamp (B) after loosening the mounting screws.
4. Check for continuity between the terminals. I ...