Other information:
Repair procedures
Removal
1. Open the fuel filler door and then remove the filler-neck mounting bolts (A).
Filler-neck assembly mounting bolt:
7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)
2. Left the vehice.
3. Remove the rear-LH wheel, tire, and the inn ...
Components and components location
Components
Repair procedures
Removal
1.Remove the brake fluid level sensor connector.
2.Remove the brake fluid from the master cylinder reservoir with a syringe.
Do
not spill brake fluid on the vehicle as it may dam ...