Kia Picanto: Light bulbs / Stop and tail lamp (LED type)
bulb replacement

If the stop and tail lamp (LED) (1) does
not operate, have your vehicle checked
by a professional workshop. Kia recommends
to visit an authorized Kia dealer/
service partner.
1. Open the tailgate.
2. Loosen the light assembly retaining
screws with a cross-tip screwdriver.
3. Remove the rear combination lamp
assembly from the body of the vehicle.
4. Disconnect th ...
If the Back-up lamp bulb (1) does not
operate, have your vehicle checked by a
professional workshop. Kia recommends
to visit an authorized Kia dealer/
service partner. ...
Other information:
Components and components location
Components
Repair procedures
Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the headlamp assembly.
(Refer to Lighting System - "Headlamps")
Installation
1.Install the headlamp assembly.
2.Connect the neg ...
Repair procedures
Removal and Installation
1.Remove the cylinder head assembly.
(Refer to Cylinder Head Assembly - "Cylinder Head")
2.Remove the water jacket insert inlet (A) and water jacket insert (B).
Be careful not to deform or damage it when rem ...