Kia Picanto: Rear Seat / Rear Seat Assembly

Kia Picanto JA 2017-2024 Service & Repair Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Assembly

Components and components location
Component Location

1. Rear seat cushion assembly
2. Rear seat back assembly

Repair procedures
Replacement
   
Put on gloves to protect your hands.
1.
Remove the rear seat cushion assembly (A).

2.
Disconnect the rear center seat belt (A).

3.
Remove the rear seat back assembly (A) after loosening the mounting bolt.
Tightening torque :
16.7 - 25.5 N·m (1.7 - 2.6 kgf·m, 12.3 - 18.8 lbf·ft)

4.
Install in the reverse order of removal.
Rear Seat
Components and components location Components [6:4 folding type] 1. Rear seat cushion pad 2. Rear seat cushion covering 3. Rear seat back covering 4. Rear seat back pad 5. Re ...

Rear Seat Back Cover
Components and components location Component Location 1. Rear seat back cover [RH] 2. Rear seat back cover [LH] Repair procedures Replacement   &nbs ...

Other information:

Kia Picanto JA 2017-2024 Owner's Manual: Pre-tensioner seat belt


Your vehicle is equipped with pre-tensioner seatbelts at the front and rear outboard seating positions EFD (Emergency Fastening Device) is equipped with driver`s seat belt. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant's body in ...

Kia Picanto JA 2017-2024 Service & Repair Manual: Master Cylinder


Components and components location Components 1. Brake booster assembly 2. Reservoir 3. Master cylinder Repair procedures Removal 1.Switch "OFF" ignition and disconnect the negative (-) battery terminal. 2.Remove the battery and battery tray. G 1.0 MPI (Refer to E ...

Copyright © www.kpicanto.com 2017-2024