Kia Picanto: Rear Door / Rear Door Inside Handle
Repair procedures
Put on gloves to protect your hands. |
•
| Use a plastic panel removal tool to remove interior trim pieces without marring the surface. |
•
| Be careful not to bend or scratch the trim and panels. |
|
1. | Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
|
2. | Separate the rear door inside handle (A) after loosening the mounting screws.
 |
3. | Remove the rear door inside handle (B) after disconnection the cable (B).
 |
4. | Install in the reverse order of removal. •
| Make sure the connector is connected properly. |
•
| Make sure the door locks/unlocks and opens/closes properly. |
•
| Replace any damaged clips. |
|
|
Components and components location
Component Location
1. Rear door trim
Repair procedures
Replacement
Put on gloves to protect your hands.
...
Components and components location
Component Location
1. Rear door window glass
Repair procedures
Replacement
Put on gloves to protect your hands.
...
Other information:
Components and components location
Component Location
1. Center pillar lower trim 2. Center pillar upper trim
Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic p ...
Description and operation
Description
Driver
Anchor Pretensioner operates as well as Belt Pretensioner at the same
time If it gets into its deploy condition after a collision. It is
located at near anchor on driver seat and it is an equipment to make up
for the existing short stroke. D ...